China wholesaler Brass cam lock coupling type B female quick coupling coupling assembly

Guarantee: 1 calendar year
Custom-made assist: OEM
Product Amount: B
Technics: Forged
Link: Feminine
Condition: Equal
Head Code: Spherical
Organization sort: Company
Type: A B C D E F DC DP
OEM: Welcome
Measurement: from 1/2
Thread: NPT or BSP
Shipping and delivery time: 1- 35 times
MOQ: 1 piece
Other content: stainless metal, aluminum, PP, nylon
Samples: Free of charge
Packaging Specifics: Interior plastic bag for each and every merchandise, then carton, plywood pallet. Or as consumer requirement
Port: HangZhou, China

Other offered substance of camlock coupling: Stainless steel, Aluminum, PP, Nylon

Camlock coupling Brass sort B

ACam Adaptor(male) with Woman BSP or NPT thread
BCam Coupler(feminine) with Male BSP or NPT thread
CCoupler(feminine) with Hose tail
DCam Coupler(woman) with Female BSP or NPT thread
ECam Adaptor(male) with Hose tail
FCam Adaptor(male) with Male BSP or NPT thread
DCDust Cap for Adaptors
DPDust Plug for Couplers

Normal: A-A59326( superseding MIL-C-27487 ) or DIN2828
Measurement1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 2-1/2″ Dia 16mm brushless 36v 30v 24v higher pace dc motor ,3″, 4″, 5″, 6″, 8″
VarietyA, B, C, D, E, F, DC, DP
Entire body content Aluminum
ThreadNPT, BSP (We normally make the woman thread parallel BSPP, male thread tapered BSPT )
GasketNBR, other resources are obtainable on request
Casting methosGravity casting or Sand casting
Handles Brass
Pin and RingMetal

How cam & groove couplings function
The coupling is connected by basically opening the coupler arms and inserting the adaptor into the coupler. The cam arms are then closed below regular hand stress to full joint

Makes use of for Camlock Fittings

Packaging & Large stage 84558759 87343615Brake Learn Cylinder suited for NewHolland suited for Scenario IH agricultural device areas Transport Packaging: Inner plastic bag for each and every item, then packing in caton, plywood pallet.

Delivery by: categorical, air , sea

Firm DataHangZhou Xihu (West Lake) Dis. Machinery Co.,Ltd. is a major maker and exporter of camlock couplings, fittings and add-ons in HangZhou, ZheJiang , China. We have a lot more than ten many years of encounter in producing hose couplings and fittings.

Our major products are camlock coupling, KC nipple, hose mender, universal air hose coupling, clean down gun, whipcheck protection cable, hose clamp, floor joint coupling, ect.
About us

Production method: Missing Wax Casting Approach – Lathe Machining – Assembly Method – Strain Testing – Packaging

one.May possibly I need samples just before determining to acquire from you?
Yes, we can provide samples cost-free of cost if not way too numerous, but we typically demand the client to shell out the freight.
two.Can I add logo to the goods?
Yes, but we usually have amount necessity if the customer want to include brand to the goods.
You can contact us for the details.
three.Can you design and style or create new merchandise for as per asked for?
Sure, we are excellent at to build new items according to the consumers demands, when you have samples
or drawing needing a factory to create for you, ninety Diploma Right Angle Speed Reducer 60mm Flange Precision Planetary Equipment Reducer you should let me know, we will try out our best to assist you.
4.What is your Min get?
We really don’t have min buy need, little buy is acceptable, but we hope the get to be much more than
USD5000 which the export cost will not occupy a massive proportion. The customers ought to be spend for the export
charge if the buy amount less USD5000.
five.What is the payment conditions you can settle for?
T/T, irrevocable L/C at sight, western union
six.What is the shipping time for an order?
The shipping time within thirty-45 times soon after you affirm the order, in accordance to your quantity.
seven.How can I know the materials is appropriate and appropriate?
Substance certificate is available on request.
eight.What if I want to get a item catalog?
Make sure you electronic mail us for the catalog.
9.I can not locate the goods I want on your web site, are you CZPT to aid me to locate it?
We are not CZPT to place each and every solution we can do on this web site, nevertheless, we have several many years of encounter of
couplings and related items and are often happy to consider to assist you.


What You Should Know About Axle Shafts

There are several things you should know about axle shafts. These include what materials they’re made of, how they’re constructed, and the signs of wear and tear. Read on to learn more about axle shafts and how to properly maintain them. Axle shafts are a crucial part of any vehicle. But how can you tell if one is worn out? Here are some tips that can help you determine whether it’s time to replace it.

Materials used for axle shafts

When it comes to materials used in axle shafts, there are two common types of materials. One is carbon fiber, which is relatively uncommon for linear applications. Carbon fiber shafting is produced by CZPT(r). The main benefit of carbon fiber shafting is its ultra-low weight. A carbon fiber shaft of 20mm diameter weighs just 0.17kg, as opposed to 2.46kg for a steel shaft of the same size.
The other type of material used in axle shafts is forged steel. This material is strong, but it is difficult to machine. The resulting material has residual stresses, voids, and hard spots that make it unsuitable for some applications. A forged steel shaft will not be able to be refinished to its original dimensions. In such cases, the shaft must be machined down to reduce the material’s hardness.
Alternatively, you can choose to purchase a through-hardened shaft. These types of axle shafts are suitable for light cars and those that use single bearings on their hub. However, the increased diameter of the axle shaft will result in less resistance to shock loads and torsional forces. For these applications, it is best to use medium-carbon alloy steel (MCA), which contains nickel and chromium. In addition, you may also need to jack up your vehicle to replace the axle shaft.
The spline features of the axle shaft must mate with the spline feature on the axle assembly. The spline feature has a slight curve that optimizes contact surface area and distribution of load. The process involves hobbing and rolling, and it requires special tooling to form this profile. However, it is important to note that an axle shaft with a cut spline will have a 30% smaller diameter than the corresponding one with an involute profile.
Another common material is the 300M alloy, which is a modified 4340 chromoly. This alloy provides additional strength, but is more prone to cracking. For this reason, this alloy isn’t suited for street-driven vehicles. Axle shafts made from this alloy are magnaflushed to detect cracks before they cause catastrophic failure. This heat treatment is not as effective as the other materials, but it is still a good choice for axle shafts.


There are three basic types of axle shafts: fully floating, three-quarter floating, and semi-floating. Depending on how the shaft is used, the axles can be either stationary or fully floating. Fully floating axle shafts are most common, but there are exceptions. Axle shafts may also be floating or stationary, or they may be fixed. When they are stationary, they are known as non-floating axles.
Different alloys have different properties. High-carbon steels are harder than low-carbon steels, while medium-carbon steels are less ductile. Medium-carbon steel is often used in axle shafts. Some shafts contain additional metals, including silicon, nickel, and copper, for case hardening. High-carbon steels are preferred over low-carbon steels. Axle shafts with high carbon content often have better heat-treatability than OE ones.
A semi-floating axle shaft has a single bearing between the hub and casing, relieving the main shear stress on the shaft but must still withstand other stresses. A half shaft needs to withstand bending loads from side thrust during cornering while transmitting driving torque. A three-quarter floating axle shaft is typically fitted to commercial vehicles that are more capable of handling higher axle loads and torque. However, it is possible to replace or upgrade the axle shaft with a replacement axle shaft, but this will require jacking the vehicle and removing the studs.
A half-floating axle is an alternative to a fixed-length rear axle. This axle design is ideal for mid-size trucks. It supports the weight of the mid-size truck and may support mid-size trucks with high towing capacities. The axle housing supports the inner end of the axle and also takes up the end thrust from the vehicle’s tires. A three-quarter floating axle, on the other hand, is a complex type that is not as simple as a semi-floating axle.
Axle shafts are heavy-duty load-bearing components that transmit rotational force from the rear differential gearbox to the rear wheels. The half shaft and the axle casing support the road wheel. Below is a diagram of different forces that can occur in the axle assembly depending on operating conditions. The total weight of the vehicle’s rear can exert a bending action on the half shaft, and the overhanging section of the shaft can be subject to a shearing force.

Symptoms of wear out

The constant velocity axle, also called the half shaft, transmits power from the transmission to the wheels, allowing the vehicle to move forward. When it fails, it can result in many problems. Here are four common symptoms of a bad CV axle:
Bad vibrations: If you notice any sort of abnormal vibration while driving, this may be a sign of axle damage. Vibrations may accompany a strange noise coming from under the vehicle. You may also notice tire wobble. It is important to repair this problem as it could be harmful to your car’s handling and comfort. A damaged axle is generally accompanied by other problems, including a weak braking response.
A creaking or popping sound: If you hear this noise when turning your vehicle, you probably have a worn out CV axle. When the CV joints lose their balance, the driveshaft is no longer supported by the U-joints. This can cause a lot of vibrations, which can reduce your vehicle’s comfort and safety. Fortunately, there are easy ways to check for worn CV axles.
CV joints: A CV joint is located at each end of the axle shaft. In front-wheel drive vehicles, there are two CV joints, one on each axle. The outer CV joint connects the axle shaft to the wheel and experiences more movement. In fact, the CV joints are only as good as the boot. The most common symptoms of a failed CV joint include clicking and popping noises while turning or when accelerating.
CV joint: Oftentimes, CV joints wear out half of the axle shaft. While repairing a CV joint is a viable repair, it is more expensive than replacing the axle. In most cases, you should replace the CV joint. Replacement will save you time and money. ACV joints are a vital part of your vehicle’s drivetrain. Even if they are worn, they should be checked if they are loose.
Unresponsive acceleration: The vehicle may be jerky, shuddering, or slipping. This could be caused by a bent axle. The problem may be a loose U-joint or center bearing, and you should have your vehicle inspected immediately by a qualified mechanic. If you notice jerkiness, have a mechanic check the CV joints and other components of the vehicle. If these components are not working properly, the vehicle may be dangerous.


There are several points of concern regarding the maintenance of axle shafts. It is imperative to check the axle for any damage and to lubricate it. If it is clean, it may be lubricated and is working properly. If not, it will require replacement. The CV boots need to be replaced. A broken axle shaft can result in catastrophic damage to the transmission or even cause an accident. Fortunately, there are several simple ways to maintain the axle shaft.
In addition to oil changes, it is important to check the differential lube level. Some differentials need cleaning or repacking every so often. CZPT Moreno Valley, CA technicians know how to inspect and maintain axles, and they can help you determine if a problem is affecting your vehicle’s performance. Some common signs of axle problems include excessive vibrations, clunking, and a high-pitched howling noise.
If you’ve noticed any of these warning signs, contact your vehicle’s manufacturer. Most manufacturers offer service for their axles. If it’s too rusted or damaged, they’ll replace it for you for free. If you’re in doubt, you can take it to a service center for a repair. They’ll be happy to assist you in any aspect of your vehicle’s maintenance. It’s never too early to begin.
CZPT Moreno Valley, CA technicians are well-versed in the repair of axles and differentials. The CV joint, which connects the car’s transmission to the rear wheels, is responsible for transferring the power from the engine to the wheels. Aside from the CV joint, there are also protective boots on both ends of the axle shaft. The protective boots can tear with age or use. When they tear, they allow grease and debris to escape and get into the joint.
While the CV joint is the most obvious place to replace it, this isn’t a time to ignore this important component. Taking care of the CV joint will protect your car from costly breakdowns at the track. While servicing half shafts can help prevent costly replacement of CV joints, it’s best to do it once a season or halfway through the season. ACV joints are essential for your car’s safety and function.

China wholesaler Brass cam lock coupling type B female quick coupling     coupling assembly